阀体的英文

1、从阀体上拆卸阀体螺栓。

Remove the body bolts from the valve body.

2、环绕整个阀体包裹电热带。

Electric tape wrap together around valve body.

3、从阀体内取出护圈和止回阀总成。

Lift retainer and check assembly from valve body.

4、使得凸轮总成阀瓣平行于阀体。

Leave the cam assembly clapper parallel to valve body.

5、在手轮下面是两个附在阀体上的螺母。

Beneath the hand wheel are two nuts attached the valve body.

6、套管也应该设计成能够从阀体内滑进滑出。

Sleeve shall also be designed to slide and out of the valve body.

7、固定器的顶部必须刚好位于阀体内螺纹下方。

The top of retainer must drop just below threads in the valve body.

8、阀门的阀体、阀板制造材料应该是球墨铸铁。

The valve body and disc of valve shall be made of ductile cast iron.

9、多接头薄壁铜阀体毛坯热挤压模设计

Design of Hot Extrusion Mould of Roughcast of Multijoint Thinwall Brazen Valve Body.

10、定位装置的侧面和阀体侧面阀座都锁定在阀体内。

Both the retainer side and the body side seats are locked into the valve body.

11、阀体材质络钼钢，耐腐蚀，耐磨损，经久耐用。

Valve body uses comol material, lt is corrosion resistant and wear and tear resistant.

12、在阀体的流体进口端设置飞机机头形导流罩。

An aircraft nose shaped air guide sleeve is arranged at the liquid inlet of the valve body.

13、阀体材料应是锻钢或铸钢并应有充分的可焊性。

Material of valve body shall be forged or cast steel and provide sufficient weldability.

14、阀体应该钻孔和攻丝用于在阀门顶部得压力连接。

Valve body shall be drilled and tapped for a pressure connection on top of the valve.

15、只有在连接完全成功粘固后，才能够重新安装阀门阀体。

Reinstall the valve body and union nuts only after the joint has fully cured.

16、主阀体应该采用耐腐蚀的300系列不锈钢制造。

The main valve body shall be manufactured from 300 Series stainless steel for corrosion resistance.

17、在阀杆与阀体的上端部之间设置填料密封结构。

A packing sealing structure is arranged between the valve rod and the upper end of the valve body.

18、在手轮下面, 在一个旋进阀体的螺母上面是一套扳手面。

Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body.